Floor Door Stops and Holders

Our wide range of door stops and holders are exactly what’s needed to keep the entryways in your building efficient and presentable.
They make it easy to haul large loads into a building as well as protecting the interior and exterior walls from damage and wear. Since 1970, we’ve supplied everything your commercial business needs to fully outfit your entryways and high traffic areas. That’s why we carry a wide range of floor door stops and holders to suit your needs.

View as Grid List

25 Items

per page
Set Descending Direction
  1. Floor Door Stop / Holder 534

    Automatic Floor Type Holder and Stop

    A replacement holder and stop that has been around for many years.   This style of Holder can be found in many of the schools, churches and hospitals that were built in the 1960's and 1970's.  Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug.  Designed for doors with a door to floor clearance of less than a 1/2".

    Plated Door Finishes

    GJ534-
    As low as $51.15
  2. Floor Mounted Dome Stop FS439

    The Ives Universal Dome Floor Stop FS439 is constructed of cast zinc or stainless steel, depending on the finish.   The stop measures 1-1/2" high, with a base height of 1/4" and base diameter of 1-7/8".   The pad has a height of 1-1/8" from the floor.

    Ives Part Number FS439

    GFS439-
    As low as $12.20
  3. Floor Mounted Decorative Stop FS410

    The Ives Decorative Floor Stop FS410 is constructed of cast brass.   It measures 1-1/2" high with a 1-1/4" diameter.  Manufacture part FS410 x Finish.

    Shown in Brass

    GFS410-
    As low as $31.48
  4. Floor Door Stop Dome 1" Height FS436

    Floor Dome Door Stop 1" Height FS436

    We ship the H.B. Ives FS436 Floor Dome Stop, another product made by Ives that has been around for 50 plus years.  Take a walk around a school made in the 1960's and you will probably find this door stop, or the hole were it used to be.  This Dome Stop is used on doors without thresholds that have a bottom of the door to floor clearance of less than 5/8".  The are constructed of cast aluminum or cast bronze depending on the finish you are looking for.  The rubber stop is non-marring and replaceable.  The stop has a base that is 1-3/4" x 2" oval, an overall height of 1" and a base height of 3/16".

     

     

    Plated Door Finishes

    GJFB13-
    As low as $6.18
  5. Floor Door Stop Dome 1-3/8" FS438

    Floor Door Stop Dome 1-3/8" FS438

    We ship the H.B. Ives FS438 Floor Dome Stop, another product made by Ives that has been around for 50 plus years.  Take a walk around a school made in the 1960's and you will probably find this door stop, or the hole were it used to be.  This Dome Stop is used on doors without thresholds that have a bottom of the door to floor clearance of less than 5/8".  The are constructed of cast aluminum or cast bronze depending on the finish you are looking for.  The rubber stop is non-marring and replaceable.  The stop has a base that is 1-3/4" x 2" oval, an overall height of 1-3/8" and a base height of 9/16".

    Plated Door Finishes

    GJFB14-
    As low as $8.96
  6. Floor Door Stop Dome 1" Height 522

    Floor Door Stop Dome 1" Height 522

    This contemporary looking Dome Stop has been a hot selling in the last few years.  The stop is constructed of forged brass, that is then chrome plated and brushed to the satin finish.  At this time, only brushed or satin chrome is available.  The base is 1-11/16" wide by 4" long and 1" tall.  The base is 5/16" thick.  This door stop ships with wood and machine screws and all of the anchors.

    GJ522
    $16.39
  7. Floor Door Stop Dome 1-1/4" Height 523

    Floor Door Stop Dome 1-1/4" Height 523

    This contemporary looking Dome Stop has been a hot selling in the last few years.  The stop is constructed of forged brass, that is then chrome plated and brushed to the satin finish.  At this time, only brushed or satin chrome is available.  The base is 1-11/16" wide by 4" long and 1-1/4" tall.  The base is 1/2" thick.  This door stop ships with wood and machine screws and all of the anchors.

    GJ523
    $22.29
  8. Floor Door Stop Dome 1-5/8" Height 521

    Dome Door Stop 1-5/8" Height 521

    The 521 is a larger version of the other dome stops we offer.  It offers forged brass construction with a gray rubber bumper.  The base measures 1-3/4" diameter x 1-5/8" High, with a 1/4"  thickness.  That this point only US26D-Brushed Satin Chrome is available.  It ships with wood screws and machine screws  and floor anchors.

    GJ521
    $10.45
  9. Floor Door Stop / Holder FS446

    Floor Door Stop / Holder FS446

    The Ives FS446 Door Stop and Holder is a modification of the FS444, which is the non holder version.   It is considered a manual type floor holder, because you have to manually latch the holder for it to hold the door open.  It is constructed of cast bronze or brass, and is no longer available in a cast aluminum.  It is designed for doors with up to 2-1/2" of undercut, meaning the distance between the finished floor and the bottom of the door. It measures 3-3/4" overall height with a 2-1/2" diameter, and the distance from the base to the center line of the rubber non-marring stop is 2-1/2".  This stop is packed with expansion shield and lead shield.

    Plated Door Finishes

    GJF26-
    As low as $42.28
  10. Floor Door Stop / Holder 536

    Floor Door Stop / Holder 536

    The Stop and Holder 536 is considered a manual door holder.   It is a manual door holder because you have to physically bend over and hook and unhook the holder.  This holder is constructed cast brass or cast bronze and then plated to your desired finish.  The stop measures 2-1/2" in diameter and 3-7/8" overall height, with a center line height of 2-1/2" from the base to the center of the rubber stop.  It ships with all of the fasteners.

    Plated Door Finishes

    GJ536-
    As low as $36.42
  11. Floor Door Stop / Holder FS40

    Floor Door Stop / Holder FS40

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 1/2" or less
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF40A-
    As low as $63.42
  12. Floor Door Stop / Holder FS41

    Floor Door Stop / Holder FS41

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF41A or F41A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS41. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 9/16" to 1-1/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF41A-
    As low as $70.02
  13. Floor Door Stop / Holder FS42

    Floor Door Stop / Holder FS42

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF42A or F42A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS42. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 1-1/8" to 1-9/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF42A-
    As low as $98.12
  14. Floor Door Stop / Holder FS43

    Floor Door Stop / Holder FS43

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF43A or F43A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS43. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 1-5/8" to 2-11/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF43A-
    As low as $99.20
  15. Floor Door Stop Heavy Duty 540

    Floor Door Stop Heavy Duty 540

    This Floor Mounted Door Stop is a personal favorite. It is extremely heavy duty, and is ideal for areas of high vandalism. Includes the 4-1/2" lag bolt & lag shield. The rubber base is 3" in diameter and is 2-5/8" high.  Uses a 3/4" diameter hole for the lag sheild.

    RB540
  16. Floor Door Stop / Holder Heavy Duty 541

    Floor Door Stop / Holder Heavy Duty 541

    This Floor Mounted Door Stop is a personal favorite. It is extremely heavy duty, and is ideal for areas of high vandalism. Includes the 4-1/2" lag bolt & lag shield. The rubber base is 3" in diameter and is 3" high.  Uses a 3/4" diameter hole for the lag sheild.

    RB541
  17. Floor Door Stop 524

    Floor Door Stop 524

    The 524 Door Stop is one of the more interesting door stops we have.   They are constructed of cast brass that is then plated to your finish.  It measures 1-1/4" in diameter and is 1-1/2" tall.  One of the benefits of this door stop is there are no exposed screws.  The 524 ships with a 12-24 x 1" machine screw, a plastic anchor and a lead anchor.

    Plated Door Finishes

    GJ524-
    As low as $23.63
  18. Floor Door Stop 535

    Floor Mounted Door Stop 535

    Cast Brass or Bronze construction
    2-1/2" diameter base x 3-1/8" high
    Fasteners included

    Plated Door Finishes

    GJ535-
    As low as $25.20
  19. Floor Door Stop / Holder

    The F20 or GJF20 was a mainstay of Glynn-Johnson for years.  When the Glynn-Johnson door stop line merged with H.B. Ives it became the FS20.  This door stop has been discontinued from Ives, but we have been able find a large stock.   This Floor Mounted Door Stop also holds the door open, when in the latched position you can push the door and the holding latch will flip up and unlock thee holding clip.   It is constructed of cast bronze or brass and then plated to your desired finish.   This stop has a 2-1/2" long base that is 1-1/2" wide.  The overall height is 3-1/8" with a 2-5/16" floor to rubber stop centerline.    For use with door undercut up to 2-1/2".

    Plated Door Finishes

    GJF20-
    As low as $47.17
  20. Floor Door Stop-Security FS18

    Floor Door Stop-Security  FS18 is designed for areas of high vandalism.   The molded rubber is flame resistant and mounted to a 5/8" threaded mounting shaft.  Once the 7/8" diameter hole is drilled to a depth of 2-1/2" it can be grouted in concrete and leaves no exposed fasteners.  The recommended grout is Thorogrip.  They are ideal for jail or security cell areas.  There are two versions of this door stop one projects 1-1/2" (FS18S) out of the floor and the other 3" (FS18L).

    GFS18-
    As low as $47.17
  21. Floor Door Stop FS434

    The Floor Door Stop FS434 is another one the old Ives parts that has been around for about 40 plus years.   The FS434 is constructed of burnished wrought steel, with a soft, resilient gray rubber shoe.  The shoe is replaceable and is under related products.  The stop measures 2-5/8" overall height, and the base measures 1-1/2" wide by 2-3/4" long.  This door stop ships with all the fasteners and anchors needed.

    GJ434
  22. Floor Door Stop FS434 09-318 Rubber Only

    Floor Door Stop FS434 09-318 Rubber Only

    Replacement rubber shoe for the FS434.  Rubber measures 2-1/4" high by 1-7/16" wide by 5/8" thick.

    Ives Part # 09-318

    GJ434R
    $6.51
  23. Floor Door Stop FS442

    Floor Door Stop FS442

    This Floor Mounted Door Stop used to go by the name Glynn Johnson GJFB19 or FB19. When Ingersoll Rand purchased H. B. Ives in the 1990's they brought it over under the Ives Floor Mounted Door Stop FS442. Features: Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts. Accommodates door undercut up to 2". Heavy-Duty cast brass or aluminum construction. Non-marring rubber bumper. This door stop has an overall height 2-7/8". Mounted shield and screws included.

    Plated Door Finishes

    GJFB19-
    As low as $33.17
  24. Floor Door Stop FS444

    Floor Door Stop FS444

    This door stop has been around a long time. We have been selling it for the past 35 years, and it is one of our best sellers year in and year out.

    Features: Ideal for interior or exterior use. Cast brass construction. Accommodates door undercut up to 2-1/2". Non-marring rubber tip. Packed with expansion shield and lead shield. This Floor Mounted Door Stop is 3" high, and the base has a 2-1/2" diameter.

    Plated Door Finishes

    RB444HD-
    As low as $27.80
  25. Magnetic Door Stop/Holder

    Magnet Door Stop

    Hands-free magnetic door stop/holder. All you need to do is open the door and a strong maget will keep it open until you close it. Mounts horizontally or vertically. Includes fasteners plus 1 concrete and 3 hollow wall anchors.

    Not for use on doors with spring hinges or door closers.

    GDS100
    As low as $23.31
View as Grid List

25 Items

per page
Set Descending Direction