Stops / Holders

Stops and holders are essential door parts needed within a school, business, or any large building. RBA Door is a leading commercial hardware provider that will help equip you with stops and holders. We carry a variety of options to best suit the way you want your door stops to function and appear. We have successfully worked with customers since 1970, and we pride ourselves in providing the best service and selections in the industry. Our knowledgeable sales representatives are waiting to speak with you about starting your order for stop and holders, so call us today.

View as Grid List

Items 1-36 of 122

per page
Set Descending Direction
Page
  1. 4" Kickdown Door Holder Grand Standard

    4" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder  you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 3-3/8" to the Floor when mounted.

     

    GJ604-
    As low as $12.99
  2. Ives Gravity Type Door Coordinator COR9G

    Gravity Door Coordinator 9"

    The Ives COR9G has been around for at least 50 years.   In the old days before electrically activated door closers fire doors would have fusible link armed door closers.  When the lnk melted, the door closed, and if there was not a mullion between door, they would use this style of door coordinator so the door with the astragal would close first.

    When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door.
    Non-handed.

    Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Made of forged brass.
    COR9G-26D for use on pairs of doors with astragal on active door over 4' or with astragal on inactive door over 3'4" or with astragal on both doors over 2'10" Brushed Chrome Finish.

    Ives part # COR9G-26D 9" Arm Projection

    COR9G
  3. Floor Mounted Dome Stop FS439

    The Ives Universal Dome Floor Stop FS439 is constructed of cast zinc or stainless steel, depending on the finish.   The stop measures 1-1/2" high, with a base height of 1/4" and base diameter of 1-7/8".   The pad has a height of 1-1/8" from the floor.

    Ives Part Number FS439

    GFS439-
    As low as $12.20
  4. Floor Mounted Decorative Stop FS410

    The Ives Decorative Floor Stop FS410 is constructed of cast brass.   It measures 1-1/2" high with a 1-1/4" diameter.  Manufacture part FS410 x Finish.

    Shown in Brass

    GFS410-
    As low as $31.48
  5. 5" Kickdown Door Holder Grand Standard

    5" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder  you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 4-3/8" to the Floor when mounted.

    made by Grand Specialties 605z 605b

    GJ605-
    As low as $13.50
  6. 6" Kickdown Door Holder Grand Standard

    6" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder  you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 5-3/8" to the Floor when mounted.

    Made by Grand Specialties 606z and 606br
    606BR is not longer manufactured  

    GJ606-
    As low as $14.50
  7. 8" Kickdown Door Holder Grand Standard

    8" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder  you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 7-3/8" to the Floor when mounted.

     Made by Grand Specialties 608z

     

    GJ608
  8. 10" Kickdown Door Holder Grand Standard

    10" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder  you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 9-3/8" to the Floor when mounted.

     Made by Grand Specialties 610z

     

    GJ610
  9. 12" Kickdown Door Holder Grand Standard

    12" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed rubber shoe can be adjusted down as the rubber shoe wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 11-3/8" to the Floor when mounted.

     Made by Grand Specialties in USA Part # 612z

    GJ612
  10. 3" Kickdown Door Holder / Stop Zinc Plated Mickey

    3" Kickdown Door Holder / Stop Zinc Plated Mickey

    Zinc plated cold rolled steel,
    Made in the USA
    3" Arm Length

    made by Grand Specialties

    GJX2M
    $10.66
  11. 4" Kickdown Door Holder Brass Deluxe

    4" Kickdown Door Holder Brass Deluxe

    Popular priced crafted holder for interior doors.
    Has 1/2" adjustment and replaceable steel re-inforced
    shoe for long life. Made of steel with brass plated finish.

    Made by Grand Specialties

    GJ6A
  12. 4" Kickdown Door Holder FS452

    4" Kickdown Door Holder FS452

    The H.B. Ives FS452 is another classic kick down door stop.  It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering.  A simple stainless steel spring clip holds the stop in the up position.  The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip.  This stop is shipped with matching finish sheet metal screws.   The 4" model is for door to floor clearances of 2" or less.  The hole spacing is 19/32" x 1-47/64".

    Ives Part # FS452

     

    Plated Door Finishes

    GJ452-4-
    As low as $37.13
  13. 4" Kickdown Door Holder FS455

    4" Kickdown Door Holder FS455

    The H.B. Ives FS455 is what people think about when they say Kick Down Door Stop.  This design has been around for almost 50 years and is try and true.   Durable and ascetically pleasing to look at.  This door holder features a simple hold and release, activated with a touch of the foot.  They are constructed of cast brass or aluminum depending on the finish that you are looking for.  The rubber tip is a non-marring and is corrugated on the bottom so it will not slide on the floor, and is easily replaceable, look under related products for the replacement shoe.  This holder is for door to floor clearances of less than 2".  This is an ideal door holder for the home, office, church or school.

    Made by H.B. Ives

     

    GJ44-
    As low as $11.22
  14. 4" Kickdown Door Holder FS544

    4" Kickdown Door Holder FS544

    The H.B. Ives FS544 Kick Down Door Holder has been a staple in schools for many years due to its heavy duty construction and inexpensive price.  This is one of our most popular Kickdown Door Holder/Stop for the past 35 years.  It is constructed of durable cast iron, which has great strength characteristics.  The shoe is made of a non-marring rubber, which is replaceable.  The shoe is also held in place with a screw, which makes it a great option in schools and area of high vandalism.  This holder will work on door to floor clearances of 2" or less.  The hole spacing is 7/8" x 1-9/16".

    Made by H.B. Ives

     

    Door Closer Stop Colors

    GJL444-
    As low as $12.38
  15. 5" Kickdown Door Stop FS452 | Ives FS452 Kick Down Door Holder

    5" Kickdown Door Holder FS452

    The H.B. Ives FS452 is another classic kick down door stop.  It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering.  A simple stainless steel spring clip holds the stop in the up position.  The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip.  This stop is shipped with matching finish sheet metal screws.   The 5" model is for door to floor clearances of 3" or less.  The hole spacing is 19/32" by 1-47/64".

    Ives Part # FS452

    Plated Door Finishes

    GJ452-5-
    As low as $39.36
  16. 5" Kickdown Door Holder FS555

    5" Kickdown Door Holder FS555

    The H.B. Ives FS555 Kick Down Door Holder has been a staple in schools for many years due to its heavy duty construction and inexpensive price.  It is constructed of durable cast iron, which has great strength characteristics.  The shoe is made of a non-marring rubber, which is replaceable.  The shoe is also held in place with a screw, which makes it a great option in schools and area of high vandalism.  This holder will work on door to floor clearances of 3" or less.  The hole spacing is 7/8" x 1-9/16".

    Made by H.B. Ives

     

    Door Closer Stop Colors

    GJL555-
    As low as $13.48
  17. International Door Closer FB-1202 Flush Bolt

    Aluminum Store Front Door Flush Bolt FB-1202

    15/16" x 4-1/4" radius face, 5-7/32" hole spacing, 1/8" offset, 5/8" throw, 12" rod length, with a square nylon tip with beveled corners fits in a 1/2" square hole.

    FB-2202-
    As low as $18.07
  18. Ives FB31P Automatic Flush Bolt

    Ives FB31P Automatic Flush Bolt

    This fully automatic flush bolt is used on the inactive metal fire door.  When the active door is opened the latches retract, when the active door closes the latches extend.  The Ives FB31P Body is 1” wide by 6-3/4” long and 2” deep. Bolt throw is 3/4” with a 7/8” adjustment with a 3/4” backset,  standard rod is 12” which is measured from the center of latch body to the bolt tip.

    Rods are also available in 18”, 24” and 36”, call for pricing.  We ship the 12” rods, and this set includes the top and bottom flush bolts.

    3 Hour UL listed

    Ives Part # FB31P

    Plated Door Finishes

    FB31P-
    As low as $195.14
  19. Ives FB61P Constant Latching Flush Bolt for Wood Doors

    Ives FB61P Constant Latching Flush Bolt for Wood Doors

    The Ives FB61P is used on the inactive leaf of wood fire doors.   The latch remains extend until the active door is opened.   When the active door is opened the latches retract, and extend when the active door is closed.  The bodies measure 1” wide by 8-1/2” tall and 2” deep.  The bolt throw is 3/4” with a 7/8” vertical adjustment, and has a 3/4” backset.   This package comes with the top and bottom flush bolts with screws and strikes.

    90 minute UL Rated.

    Ives Part # FB61P

    Plated Door Finishes

    FB61P-
    As low as $179.70
  20. Floor Door Stop / Holder 534

    Automatic Floor Type Holder and Stop

    A replacement holder and stop that has been around for many years.   This style of Holder can be found in many of the schools, churches and hospitals that were built in the 1960's and 1970's.  Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug.  Designed for doors with a door to floor clearance of less than a 1/2".

    Plated Door Finishes

    GJ534-
    As low as $51.15
  21. Crash Chain Door Stop CS115

    Crash Chain Door Stop CS115

    • Specially designed for full-size exterior doors.
    • Tear resistant, grey vinyl cover.
    • Heavy duty compression spring assembled to both ends of chain
      and end brackets.
    • Packed with sheet metal screws.
    • Cast Brass brackets with solid, welded steel chain.

    Available in 20-1/2", 25-1/2" and 30-1/2" lengths. Length is determined
    by the location of your door closer

    PART # LENGTH
    GCC205 20-1/2"
    GCC255 25-1/2"
    GCC305 30-1/2"

    GCC205-
    As low as $55.29
  22. Floor Door Stop Dome 1" Height 522

    Floor Door Stop Dome 1" Height 522

    This contemporary looking Dome Stop has been a hot selling in the last few years.  The stop is constructed of forged brass, that is then chrome plated and brushed to the satin finish.  At this time, only brushed or satin chrome is available.  The base is 1-11/16" wide by 4" long and 1" tall.  The base is 5/16" thick.  This door stop ships with wood and machine screws and all of the anchors.

    GJ522
    $16.39
  23. Floor Door Stop Dome 1" Height FS436

    Floor Dome Door Stop 1" Height FS436

    We ship the H.B. Ives FS436 Floor Dome Stop, another product made by Ives that has been around for 50 plus years.  Take a walk around a school made in the 1960's and you will probably find this door stop, or the hole were it used to be.  This Dome Stop is used on doors without thresholds that have a bottom of the door to floor clearance of less than 5/8".  The are constructed of cast aluminum or cast bronze depending on the finish you are looking for.  The rubber stop is non-marring and replaceable.  The stop has a base that is 1-3/4" x 2" oval, an overall height of 1" and a base height of 3/16".

     

     

    Plated Door Finishes

    GJFB13-
    As low as $6.18
  24. Floor Door Stop Dome 1-1/4" Height 523

    Floor Door Stop Dome 1-1/4" Height 523

    This contemporary looking Dome Stop has been a hot selling in the last few years.  The stop is constructed of forged brass, that is then chrome plated and brushed to the satin finish.  At this time, only brushed or satin chrome is available.  The base is 1-11/16" wide by 4" long and 1-1/4" tall.  The base is 1/2" thick.  This door stop ships with wood and machine screws and all of the anchors.

    GJ523
    $22.29
  25. Floor Door Stop Dome 1-5/8" Height 521

    Dome Door Stop 1-5/8" Height 521

    The 521 is a larger version of the other dome stops we offer.  It offers forged brass construction with a gray rubber bumper.  The base measures 1-3/4" diameter x 1-5/8" High, with a 1/4"  thickness.  That this point only US26D-Brushed Satin Chrome is available.  It ships with wood screws and machine screws  and floor anchors.

    GJ521
    $10.45
  26. Floor Door Stop / Holder FS446

    Floor Door Stop / Holder FS446

    The Ives FS446 Door Stop and Holder is a modification of the FS444, which is the non holder version.   It is considered a manual type floor holder, because you have to manually latch the holder for it to hold the door open.  It is constructed of cast bronze or brass, and is no longer available in a cast aluminum.  It is designed for doors with up to 2-1/2" of undercut, meaning the distance between the finished floor and the bottom of the door. It measures 3-3/4" overall height with a 2-1/2" diameter, and the distance from the base to the center line of the rubber non-marring stop is 2-1/2".  This stop is packed with expansion shield and lead shield.

    Plated Door Finishes

    GJF26-
    As low as $42.28
  27. Floor Door Stop / Holder 536

    Floor Door Stop / Holder 536

    The Stop and Holder 536 is considered a manual door holder.   It is a manual door holder because you have to physically bend over and hook and unhook the holder.  This holder is constructed cast brass or cast bronze and then plated to your desired finish.  The stop measures 2-1/2" in diameter and 3-7/8" overall height, with a center line height of 2-1/2" from the base to the center of the rubber stop.  It ships with all of the fasteners.

    Plated Door Finishes

    GJ536-
    As low as $36.42
  28. Floor Door Stop / Holder FS40

    Floor Door Stop / Holder FS40

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 1/2" or less
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF40A-
    As low as $63.42
  29. Floor Door Stop / Holder FS41

    Floor Door Stop / Holder FS41

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF41A or F41A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS41. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 9/16" to 1-1/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF41A-
    As low as $70.02
  30. Floor Door Stop / Holder FS42

    Floor Door Stop / Holder FS42

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF42A or F42A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS42. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 1-1/8" to 1-9/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF42A-
    As low as $98.12
  31. Floor Door Stop / Holder FS43

    Floor Door Stop / Holder FS43

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF43A or F43A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS43. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 1-5/8" to 2-11/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF43A-
    As low as $99.20
  32. Floor Door Stop / Holder Heavy Duty 541

    Floor Door Stop / Holder Heavy Duty 541

    This Floor Mounted Door Stop is a personal favorite. It is extremely heavy duty, and is ideal for areas of high vandalism. Includes the 4-1/2" lag bolt & lag shield. The rubber base is 3" in diameter and is 3" high.  Uses a 3/4" diameter hole for the lag sheild.

    RB541
  33. Floor Door Stop 524

    Floor Door Stop 524

    The 524 Door Stop is one of the more interesting door stops we have.   They are constructed of cast brass that is then plated to your finish.  It measures 1-1/4" in diameter and is 1-1/2" tall.  One of the benefits of this door stop is there are no exposed screws.  The 524 ships with a 12-24 x 1" machine screw, a plastic anchor and a lead anchor.

    Plated Door Finishes

    GJ524-
    As low as $23.63
  34. Floor Door Stop 535

    Floor Mounted Door Stop 535

    Cast Brass or Bronze construction
    2-1/2" diameter base x 3-1/8" high
    Fasteners included

    Plated Door Finishes

    GJ535-
    As low as $25.20
  35. Floor Door Stop / Holder

    The F20 or GJF20 was a mainstay of Glynn-Johnson for years.  When the Glynn-Johnson door stop line merged with H.B. Ives it became the FS20.  This door stop has been discontinued from Ives, but we have been able find a large stock.   This Floor Mounted Door Stop also holds the door open, when in the latched position you can push the door and the holding latch will flip up and unlock thee holding clip.   It is constructed of cast bronze or brass and then plated to your desired finish.   This stop has a 2-1/2" long base that is 1-1/2" wide.  The overall height is 3-1/8" with a 2-5/16" floor to rubber stop centerline.    For use with door undercut up to 2-1/2".

    Plated Door Finishes

    GJF20-
    As low as $47.17
  36. Floor Door Stop-Security FS18

    Floor Door Stop-Security  FS18 is designed for areas of high vandalism.   The molded rubber is flame resistant and mounted to a 5/8" threaded mounting shaft.  Once the 7/8" diameter hole is drilled to a depth of 2-1/2" it can be grouted in concrete and leaves no exposed fasteners.  The recommended grout is Thorogrip.  They are ideal for jail or security cell areas.  There are two versions of this door stop one projects 1-1/2" (FS18S) out of the floor and the other 3" (FS18L).

    GFS18-
    As low as $47.17
View as Grid List

Items 1-36 of 122

per page
Set Descending Direction
Page